|
American
Filtration Offers a Full Line of Replacement and Custom Made Air Filters for both Residential Filters and
Commercial Air Filtration Systems. Featuring a full line of Antibacterial, Special Sizes, High Performance Pleated, Paint Pads & Rolls, & Odor Control. Compare our prices, quality, and efficiency ratings to the 3M Filtrete, Purolator PuroPleat, Farr,
AirGuard, Koch, and Precisionair
|
|
|
|
|
AmAir®
C Odor Control
 Disposable
filters for economical, effective,
long-lasting odor control and particulate filtration.
The effectiveness
of any odor control filter corresponds to the density (weight
per square foot) of activated carbon contained in the product.
AmAir C filters are more effective than other odor control
filters because they contain more carbon - up to 50 times more.
Greater carbon density solves your odor problems by removing
odor concentrations and providing protection over a longer
period of time. The true test of a carbon filter is how
long it will continue to remove objectionable odors. AmAir
C filters deliver fresh air longer.
No messy trays to
refill or exchange. Simply install the filters as
you would standard air filters and dispose of them when they are
no longer effective.
Effective on
wide variety of odors found in:
• Commercial buildings
• Shopping Centers
• Hospitals
• Restaurants
• Health Clubs
• Homes
• Schools
• Hotels/Motels
Easy to install and
directly interchangeable with standard air
filters.
Unique Three-Stage
Panel Filter Construction collects
particulate and
removes odors
• Prefilter
 The
outer layer of media is made of polyester fibers for effective
particulate collection. Removal of particulate extends the odor
adsorbing life of the carbon granules by preventing the millions of
tiny pores from becoming clogged with dirt.
• Activated Carbon
- Guide
for Vapors, Gases and Fumes removed by Activated Carbon.
The second stage is a substrate impregnated with a high density of
granular, 60% minimum activity-rated carbon. The unique carbon
imbedding process bonds the granules to the fibers preventing carbon
settling or spilling. On 1" filters the carbon granules are
impregnated into the air leaving side of the first stage polyester
media.
• Final Filter
The third stage is made of polyurethane foam that serves as both a
final filter for particulate collection and a protective covering for
the carbon pad to prevent the granules from being dislodged. To assure
the entire amount of carbon stays on the substrate, the foam pad is
folded up over the edges and bonded to the carbon pad, completely
encasing it.
Totally Unitized Construction offers
Superior Strength
Panel style filters are
contained in a frame constructed of high wet strength, moisture
resistant beverage board. Two mating die cut boxes are bonded together
forming a double wall around the entire filter. The three stage media
pad is bonded to the inside of the frame on all four edges to prevent
leakage and increase rigidity. On 2" thick panel filters, an
expanded metal plate is inserted to provide additional support. Each
panel filter or pad is individually sealed in a poly bag to prevent
adsorption of random odors prior to installation.
AmAir C panel filters
are available with three levels of carbon loading to solve various
degrees of odor problems. The higher the carbon density (weight of
carbon per square foot of filter face area), the more gas molecules
the filter can adsorb. This enables the filter to adsorb higher
concentrations of odor and continue to provide freshened air over a
longer period of time.
| Performance
Data |
Initial
Resistance
(In. W.G.)
300FPM |
Initial
Resistance
(In. W.G.)
500FPM |
Rated
Average
Arrestance
@ 500 FPM |
Recommended
Final Resistance
(In. W.G.) |
Carbon
Density
(Gms./Ft.2) |
| AmAir C-1 (1"
depth) |
.18" |
.42" |
60-65% |
1.0" |
100 |
| AmAir C-2 ( 2"
depth) |
.22" |
.51" |
70-75% |
1.2" |
150 |
| AmAir C-3 ( 2"
depth) |
.31" |
.75" |
75-80% |
1.2" |
300 |
Nominal
Size Inches
(W x H x D) |
Actual
Size Inches
(W x H x D) |
Rated
Air Flow Capacity
(CFM) |
| AmAir
C-1 |
| 12
x 24 x 1 |
11
7/16 x 23 7/16 x 7/8 |
1,000 |
| 16
x 20 x 1 |
15
7/16 x 19 7/16 x 7/8 |
1,100 |
| 16
x 25 x 1 |
15
7/16 x 24 7/16 x 7/8 |
1,400 |
| 20
x 20 x 1 |
19
7/16 x 19 7/16 x 7/8 |
1,400 |
| 20
x 25 x 1 |
19
7/16 x 24 7/16 x 7/8 |
1,750 |
| 24
x 24 x 1 |
23
7/16 x 23 7/16 x 7/8 |
2,000 |
| AmAir
C-2 |
| 12
x 24 x 2 |
11
7/16 x 23 7/16 x 1¾ |
1,000 |
| 16
x 20 x 2 |
15
7/16 x 19 7/16 x 1¾ |
1,100 |
| 16
x 25 x 2 |
15
7/16 x 24 7/16 x 1¾ |
1,400 |
| 18
x 24 x 2 |
17
7/16 x 23 7/16 x 1¾ |
1,500 |
| 20
x 20 x 2 |
19
7/16 x 19 7/16 x 1¾ |
1,400 |
| 20
x 24 x 2 |
19
7/16 x 23 7/16 x 1¾ |
1,650 |
| 20
x 25 x 2 |
19
7/16 x 24 7/16 x 1¾ |
1,750 |
| 24
x 24 x 2 |
23
7/16 x 23 7/16 x 1¾ |
2,000 |
| AmAir
C-3 |
| 12
x 24 x 2 |
11
7/16 x 23 7/16
x 1¾ |
1,000 |
| 16
x 20 x 2 |
15
7/16 x 19 7/16
x 1¾ |
1,100 |
| 16
x 25 x 2 |
15
7/16 x 24 7/16
x 1¾ |
1,400 |
| 18
x 24 x 2 |
17
7/16 x 23 7/16
x 1¾ |
1,500 |
| 20
x 20 x 2 |
19
7/16 x 19 7/16
x 1¾ |
1,400 |
| 20
x 24 x 2 |
19
7/16 x 23 7/16
x 1¾ |
1,650 |
| 20
x 25 x 2 |
19
7/16 x 24 7/16
x 1¾ |
1,750 |
| 24
x 24 x 2 |
23
7/16 x 23 7/16
x 1¾ |
2,000 |
*All performance data
is based on the ASHRAE 52-1-1992 test method. Performance
tolerances conform to Section 7.4 ARI Standard 850-93.
Guide
for Vapors, Gases and Fumes removed by Activated Carbon.
The numbers given
represent typical or average conditions and might vary in specific
instances. The values in the table have been assembled from many
sources including laboratory tests and field experience.
The capacity index has
the following meaning:
4.
High capacity for all materials in this category. One pound takes up
about 20% to 50% of its own weight average about 1/3 (33 1/3%). This
category includes most of the odor causing substances.
3.
Satisfactory capacity for all items in this category. These constitute
good applications but the capacity is not as high as for category 4.
Absorbs about 10% to 25% of its weight-average about 1/6 (16.7%).
2.
Includes substances which are not highly adsorbed but which might be
taken up sufficiently to give good service under the particular
conditions of operation. These require individual checking.
1.
Adsorption capacity is low for these materials. Activated carbon
cannot be satisfactorily used to remove them under ordinary
circumstances.
* Straight activated
carbon does not have much capacity for some reactive gases, such as
ammonia, formaldehyde, etc. In some cases where the gas is
chemically reactive, appropriate impregnated activated carbon can be
recommended. Those odorants marked below with an asterisk fall into
this category.
| Substance
* Acetaldehyde
Acetic acid
Acetic anhydrite
Acetone
* Acetylene
* Acrolein
Acrylic acid
Aerylonitrile
Adhesives
Air-Wick
Alcoholic beverages
* Amines
* Ammonia
Amyl acetate
Amyl alcohol
Amyl ether
Animal odors
Anesthetics
Aniline
Antiseptics
Asphalt fumes
Automobile exhaust
Bathroom smells
Benzene
* Bleaching solutions
Body odors
Bromine
Burned flesh
Burned food
Burning fat
Butadiene
Butane
Butanone
Butyl acetate
Butyl alcohol
Butyl cellosolve
Butyl chloride
Butyl ether
* Butylene
* Butyne
* Butyraldehyde
Butyric acid
Camphor
Cancer odor
Caprylic acid
Carbolic acid
Carbon disulfide
* Carbon dioxide
Carbon monoxide
Carbon tetrachloride
Cellosolve
Cellosolve acetate
Charred materials
Cheese
* Chlorine
Chlorobenzene
Chlorobutadiene
Chloroform
Chloronitropropane
Chloropicrin
Cigarette smoke odor
Citrus and other fruits
Cleaning compounds
Coal smoke odor
Combustion odors
Cooking odors
* Corrosive gases
Creosote
Cresol
Crotonaldehyde
Cyclohexane
Cyclohexanol
Cyclohexanone
Cyclohexene
Dead animals
Decane
Decaying substances
Deodorants
Detergents
Dibromoethane
Dichlorobenzene
Dichlorodifluoromethane
Dichloroethane
Dichloroethylene
Dichloroethyl ether
Dichloromonoflourmethane
Dichloronitroethane
Dichloropropane
Dichlorotetrafluoroethane
Diesel fumes
* Diethylamine
Diethyl ketone
Dimethylaniline
Dimethylsulfide
Dioxane
Dipropyl ketone
Disinfectants
Embalming odors
Epoxy
Ethane
Ether
Ethyl acetate
Ethyl acrylate
Ethyl alcohol
* Ethyl amine
Ethyl benzene
Ethyl bromide
Ethyl chloride
Ethyl ether
Ethyl formate
Ethyl mercaptan
Ethyl silicate
* Ethylene
Ethylene chlorohydrin
Ethylene dichloride
Ethylene oxide
Essential oils
Eucalyptole
Exhaust fumes
Female odors
Fertilizer
Film Processing odors
Fish odors
Floral scents
Fluorotrichloromethane
Food aromas
* Formaldehyde
* Formic acid
Fuel gases
Fumes
Gangrene
Garlic
Gasoline
GLVES
Heptane
Heptylene
Hexane
* Hexylene
* Hexyne
Hospital odors
Household smells
Hydrogen
* Hydrogen bromide
* Hydrogen Chloride
* Hydrogen cyanide
* Hydrogen fluoride
* Hydrogen iodide
* Hydrogen selenide
* Hydrogen sufide
Incense
Indole
Industrial wastes
Ink odors
Iodine
Idoform
Irritants
Isophorone
* Isoprene
Isopropyl acetate
Isopropyl alcohol
Isopropyl ether
Kerosene
Kitchen odors
Lactic acid
Lingering odors
Liquid fuels
Liquor odors
Lubricating oils and greases
Lysol
Masking agents
Medicinal odors
Melons
Menthol
Mercaptans
Mesityl oxide
Methane
Methyl acetate
Methyl acrylate
Methyl alcohol
Methyl bromide
Methyl butyl ketone
Methyl cellosolve
Methyl cellosolve acetate
Methyl chloride
Methyl Chloroform
Methyl ether
Methyl ethyl ketone
Methyl formate
Methyl Iodine
Methyl isobutyl ketone
Methyl mercaptan
Methylcyclohexane
Methylcyclohexanol
Methylcyclohexanone
Methylene chloride
Mildew
Mixed odors
Mold
Monochlorobenzene
Moth balls
Naphtha (coal tar)
Naphtha (petroleum)
Naphthalene
Nicotine
* Nitric acid
Nitro benzenes
Nitroethane
* Nitrogen dioxide
Nitroglycerine
Nitromethane
Nitropropane
Nitrotoluene
Nonane
Noxious gases
Octalene
Octane
Odorants
Onions
Organic chemicals
Ozone
Packing house odors
Paint and Redecorating odors
Palmitic acid
Paper deteriorations
Paradichlorobenzene
Paste and glue
Pentane
Pentanone
* Pentylene
* Pentyne
Perchloroethylene
Perfumes, cosmetics
Perspirations
Persistent odors
Pet odors
Phenol
Phosgene
Pitch
Plastics
Poison gases
Pollen
Popcorn and candy
Poultry odors
Propane
* Propionaldehyde
Propionic acid
Propyl acetate
Propyl chloride
Propyl ether
Propyl Mercaptan
* Propylene
* Propyne
Putrefying substances
Putrescine
Pyridine
Radiation products
Rancid oils
Resins
Reodorants
Ripening fruits
Rubber
Sauerkraut
Sewer odors
Skatole
Slaughtering odors
Smog
Soaps
Smoke
Solvents
Sour milks
Spilled beverages
Spoiled food stuffs
Stale odors
Stoddard solvent
Stuffiness
Styrene monomer
* Sulfur dioxide
* Sulfur trioxide
Sulfuric acid
Tar
* Tarnishing gases
Tetracholoroethane
Tetrachloroethylene
Theatrical makeup odors
Tobacco smoke odor
Toilet odors
Toluene
Toluidine
Trichlorethylene
Trichloroethane
Turpentine
Urea
Uric acid
Valeric acid
Valericaldehyde
Varnish fumes
Vinegar
Vinyl chloride
Volatile materials
Waste products
Wood alcohol
Xylene |
Index
2
4
4
3
1
3
4
4
4
4
4
2
2
4
4
4
3
3
4
4
4
3
4
4
3
4
4
4
4
4
3
2
4
4
4
4
4
4
2
2
3
4
4
4
4
4
4
1
1
4
4
4
4
4
3
4
4
4
4
4
4
4
4
3
3
4
3
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
3
4
4
4
4
3
4
4
4
4
4
4
4
4
1
3
4
4
4
3
4
4
3
3
3
3
4
1
4
4
3
4
4
3
4
4
3
4
4
3
4
2
3
2
3
4
4
4
4
4
4
3
3
3
4
4
1
3
2
3
2
3
2
3
4
4
3
4
4
4
4
4
3
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
1
3
4
3
3
4
4
4
3
4
3
4
3
2
4
4
4
4
4
4
3
4
3
4
4
4
4
4
4
3
4
4
2
4
4
4
4
4
3
4
4
4
4
4
4
4
4
4
4
4
4
3
4
3
3
4
4
4
4
4
4
3
4
4
3
3
4
4
2
3
4
4
4
4
4
2
2
3
4
4
2
4
4
4
4
4
4
4
4
3
4
4
4
3
4
4
4
4
4
4
4
2
3
4
4
3
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
3
3
4
3
4 |
|
|
|
AmAir®, PerfectPleat®, Dirt Demon®, Intersept®, VariCel®, BioCel®, AstroCel®, RigiFil®, DriPak®,
Air Cobra®, FrontLine®, PolyKlean®, Roll-O-Mat®, Roll-0-Tron®, StrataDensity®,AmerFrame®,RenuFrame®, are registered trademarks of AAF-McQuay Inc.
|
|
|
American Filtration is a wholly owned subsidiary of AF
Enterprises, Inc. ©
American Filtration is
a proud distributor of AAF®
International and American
Air Filter® products and is not a subsidiary of AAF-McQuay
Inc. the manufacturer of these products.
American
Filtration
P.O. Box 922 • 140 SW
Haskew St, Suite 3 • Burleson, TX 76097
Tel. 888-844-5820 • FAX 817-447-2688
Please review our Privacy/Security information.
Shopping
Cart Customer Service
Contact
Us Order Status
Commercial Customers
|
