|
The
IP
Fiberglass Panel Filter
provides premium performance
with extra strength. The
one-piece frame design ensures
corner integrity during
handling, installation, and
operation. It is made from
durable, moisture-resistant
chipboard that will stand up to
harsh conditions. Designed
for commercial and residential
air filtration systems.
Lasts up to 30 days. Rated MERV
4.
Available in 1" & 1/2" depths For
more information on the IP
Fiberglass Panel Filter, please click
here.
Custom
Made Instructions:
Only the width and length can be
custom made. The depth is
manufactured according to
industry standards, therefore
select either a "1" or "1/2"
depth from the drop down box.
The
width and length will be made to
your exact specifications,
within a tolerance of ± 1/8", so
please enter the exact actual
width and length of the filter.
Enter
fractions as decimals.
Please refer to the fraction
conversion chart below:
| 1/8"
= .125 |
5/8"
= .625 |
| 1/4"
= .25 |
3/4"
= .75 |
| 3/8"
= .375 |
7/8"
= .875 |
| 1/2"
= .50 |
|
Example:
If your size is 14-1/4" x
24-7/8" x 1", as shown
above, you would enter:
14.25 in the "Width"
box
24.875 in the "Length"
box
and select 1 from the "Depth"
drop down box. Minimum
Order: 1 case (12 filters)
Custom
made filters are non-returnable. Enter
your filter's exact width and
length below and select your
depth from the drop down box. Click on
"Calculate Filter
Cost". If you make a
mistake click on
"Clear" and re-enter
your measurements again and click on
"Calculate Filter
Cost". After your
cost is calculated, click on "Next" to continue.
Unable to Calculate Your Filter
Cost?
Click
Here for Help
|
)