
Custom Made MERV 11 Allergy Reduction Pleated Filter
Details:
Ultra high efficiency allergy reduction pleated air filter with electrostatically charged synthetic media. Highly efficient electrostatic filtering material attracts dust and pollen like a magnet. Captures microscopic airborne dust, pollen, mold spores, pet dander, bacteria and the particles that carry viruses. Premium performance and construction with a high dust holding capacity.
Rated MERV 11. Lasts 60-90 days.
For more information on the AmAir 1100 please click here.
Custom Made Instructions: Only the width and length can be custom made. The depth is manufactured according to industry standards, therefore enter either a 1 or 2 in the depth box.
The width and length will be made to your exact specifications, within a tolerance of © 1/8", so please enter the exact actual width and length of the filter.
Enter fractions as decimals. Please refer to the fraction conversion chart below:
1/8" = .125 | 5/8" = .625 |
1/4" = .25 | 3/4" = .75 |
3/8" = .375 | 7/8" = .875 |
1/2" = .50 |

Example: If your size is 14-1/4" x 24-7/8" x 1", as shown above, you would enter:
14.25 in the "Width" box
24.875 in the "Length" box
and 1 in the "Depth" box.
Minimum Order: 1 case (12 filters)
Custom made filters are non-returnable.
Enter your filter information below. Click on "Calculate Filter Cost". If you make a mistake click on "Clear" and re-enter your measurements then click on "Calculate Filter Cost" again. Now, click on "Next" to continue.